Infineon Technologies has further refined its high-bandwidth, low-pin memory solution with the introduction of its new HYPERRAM™ 3.0 device. The device features a new 16-bit expanded HyperBus™ interface that doubles throughput to 800MBps.
PD fast charging power source solutions for ON Semiconductor NCP1623 and NCP1343 products and GaN System GS-065-011-2-L power transistors.
Qorvo Inc introduces a small and compact integrated front-end module (iFEM) that provides efficient and reliable whole-home coverage for Wi-Fi 6 (802.11ax) and eventually Wi-Fi 7 systems, Qorvo's QPF7250 integrates the 2.4 GHz Power Amplifier (PA), FCC edgeBoost Bulk Acoustic Wave (BAW) Filter, Transmit/Receive Switch (SP2T) and Low Noise Amplifier (LNA) with Bypass for DC and RF Power Detectors
The new OSLON UV family member from ams has market-leading electro-optical conversion efficiency. According to internal tests, the average conversion efficiency is 5.7% at the wavelength of 265 nm, which has the highest sterilization efficiency. The light output, along with the compact package design, provides greater options for any application requiring UV-C radiation and expands the possibilities from consumer applications such as surface disinfection to industrial applications such as overhead air treatment in public spaces.
Molex now offers its first-to-market, pluggable module solution for CPO. Its new ELSIS is a complete system of cage, optical and electrical connectors with a pluggable module that employs proven technology to speed the development of hyperscale data centres.
Würth Electronics presents a multi-layer chip antenna for miniaturized wireless applications. The WE-MCA antenna (7488918022) measures only 40 × 6 × 5 mm and covers the 700 to 960 MHz and 1710 to 2690 MHz frequency ranges. With a uniquely designed form factor and extremely low height, this antenna offers an excellent size-to-performance ratio.
The ADXL345 is a small, thin, low-power three-axis accelerometer that provides high-resolution (13-bit) measurements of acceleration up to ±16g. The digital output data is in 16-bit twos complement format and can be or 4-wire) or I2C digital interface access.
The Allegro MicroSystems A89506 full-bridge PWM gate driver is optimized for PWM control of DC motors. The device is capable of operating at 50V and can provide gate drive for all n-channel external MOSFET bridges. The device includes input terminals for controlling the speed and direction of the DC motor using an externally applied PWM control signal. The internal synchronous rectification control circuit reduces power consumption through PWM operation.
Laird Connectivity's Summit SOM 8M Plus development kit enables engineers to develop with Laird Connectivity's Summit Modular System (SOM) 8M Plus, a highly integrated software and hardware solution, It is supported by a high performance NXP Semiconductors i.M 8M Plus processor. The Summit SOM 8M Plus development suite supports the development of advanced wireless Internet of Things (IoT) applications, including industrial IoT devices for harsh environments, IoT vision solutions, and medical devices.
Cree LED Colour LEDs offer a wide range of spectral options for general and speciality lighting applications. These LEDs provide a small package size, low power consumption and are application-optimised to facilitate the lowest system cost. The LEDs are easy-to-choose, simple to use, and created to provide beautiful, long-lasting, energy-efficient light.
Diodes Incorporated offer a series of bidirectional current monitors based on a high-stability zero-drift architecture. These devices can accurately measure very low sense voltages over a wide range of common-mode voltages. Key applications include servers, power supply racks in server farms, laptop PCs, battery chargers, industrial servos, and robotic systems.
Sensata Technologies has created a new fly-by-wire inceptor for electric vertical take-off and landing (eVTOL) aircraft and has supplied prototypes to several advanced air mobility manufacturers.
Analog Devices ADPD6000 multi-modal sensor front end, is highly integrated, designed to measure a variety of important signals. AFE optical channels are created as optical modules that stimulate up to 4 LEDs and measure the return signal at 4 independent current inputs. The signal chain rejects signal skew and corruption from asynchronous modulation interference, typically from ambient light, eliminating the need for optical filters or externally controlled DC cancellation circuits.
Infineon Technologies AG has introduced highly efficient and reliable step-down DC-DC converter modules. Adding to the PoL family, these modules are ideal for system designers looking for compact, fully integrated, and simple-to-design POL products to assist them in speeding time to market. They primarily address space and thermally constrained telecom and datacom applications, servers, and network storage.
TDK Corporation has expanded its TMR angle sensor portfolio with the release of the TAS4240 TMR-based angle-sensor for automotive and industrial applications. The device is supplied in a compact TSSOP8 package and offers two redundant analog single-ended SIN/COS outputs. The sensor provides precise angle measurements in applications where high performance is required and space is limited.
Texas Instruments AMC22C11-Q1 Automotive Grade Isolated Comparator is a short response time isolated comparator. The open-drain output is separated from the input circuit by an isolation barrier. The isolation barrier is highly resistant to magnetic field disturbances. It is certified to provide galvanic isolation up to 3kVRMS according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577. It supports operating voltages up to 560VRMS.
Vishay Intertechnology, Inc. has announced the availability of three small form-factor devices -- IHP-0603, 0805 and 0806 -- IHP-0603zh-01, IHP-0805zh-01 and IHP-0806zh-01. Expand its IHHP series of ultra-thin, high-current power inductors. Vishay Dale IHP-0603zh-01, IHP-0805zh-01, and IHP-0806zh-01 feature low DCR, low core loss, and a maximum height of only 0.8 mm for use in Internet of Things (IoT) devices and portable electronics, saving space and increasing efficiency.
Texas Instruments ISOUSB111DWXEVM Evaluation Module (EVM) is used to evaluate a high-performance 5000VRMS reinforced isolated USB repeater in a 16-pin SSOP (DWZ-16) package. The evaluation module has test point and jumper options to support evaluation with minimal external components.
